Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 29
Presence Detector Features
Product features for the Zūm Link Presence Detectors are provided below.
l
Ceiling-mount presence sensor
l
Passive infrared (PIR), ultrasonic, or dual-technology motion detection
l
360 degree coverage pattern
l
Fully digital circuitry for low cost and high reliability
l
Built-in closed loop daylight sensor
l
Control system communications the Zūm® Link network
l
Compatible with Zūm wired keypad
l
For the -RLY models, additional relays included for input-relay capable devices
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
Easy Installation
For flexibility and ease-of-use, install Zūm devices (load controllers, keypads, and presence
detectors, refer to Overview on page 8) and connect them with Zūm Link
(CBL-CAT5E-ZUMLINK-P) or Zūm Net (CBL-CAT5E-ZUMNET-P) CAT5e cable (refer to Cables
on page 14). Nonsystem presence detectors may also be installed to any load controller with
analog inputs.
To Next Page
Loading...
