36 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Cable Features
Cables are available for Zūm Net and Zūm Link applications.
l
CBL-CAT5E-ZUMNET-P Zūm Link Wiring on page 36
l
CBL-CAT5E-ZUMLINK-P Zūm Link Wiring on page 36
CBL-CAT5E-ZUMNET-P CBL-CAT5E-ZUMLINK-P
CBL-CAT5E-ZUMNET-P Zūm Link Wiring
l
Preterminated CAT5e cable for Zūm Net device communications between rooms in a
Zūm® Wired system
l
RS485 Communications
l
Plenum-rated jacket
l
RJ-45 connectors with dust cap
l
Available in four lengths
CBL-CAT5E-ZUMNET-P cables connect a Zūm Net device to a ZUM-HUB4 control system (refer
to Hub on page 12), an Ethernet switch, or to other Zūm Net devices. This enables LAN
communications and device daisy-chaining between rooms within a Zūm Wired system.
CBL-CAT5E-ZUMLINK-P Zūm Link Wiring
l
Preterminated CAT5e cable for Zūm Link device communications within a Zūm® Wired
space
l
RS485 Communications
l
Plenum-rated jacket
l
RJ-45 connectors
l
Available in seven lengths
CBL-CAT5E-ZUMLINK-P cables distribute power between Zūm Link devices for in-room device
daisy chaining. They provide communications between load controllers, keypads, sensors, and
any other devices within a Zūm Wired room as well as transport emergency override capabilities.
CBL-CAT5E-ZUMLINK-P cables also distribute power and data between Zūm Net and Zūm Link
devices to facilitate network expansion.
To Next Page
Loading...
