Crestron Zum - Rocker and Button Tree Features

Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 39
Rocker and Button Tree Features
Product features for the rocker and button tree configurations are provided below.
l
Provides multiple button configurations for ZUMLINK-KP keypads
l
Two-piece installation: button tree or rocker with matching bezel
l
Easily swap button configurations in the field
l
Available as a rocker button or in configurations of two, four, six, or eight button trees
l
Pad printed labeling or custom engravings available
l
Offered in black, white, almond, gray, or red finishes
Pad Printing
Pad printed button trees allow for convenient preprinted labeling on any ZUMLINK-BTN
configuration. Visit the following product pages to view the various button configurations and
colors offered for the pad printed models.
l
ZUMLINK-BTN2: ZONE 1, ZONE 2
l
ZUMLINK-BTN4: ON, SCENE 2, SCENE 3, OFF
l
ZUMLINK-BTN6: ON, SCENE 2, SCENE 3, OFF, ˄, ˅
l
ZUMLINK-BTN8: ON, OFF, ON, OFF, ˄, ˅, ˄, ˅
Custom Engraving
Crestron Engraver software makes it easy to specify and order button trees with custom
engravings for a ZUMLINK-KP Zūm Wired Keypad. Visit the following product pages to view the
various button configurations and colors offered for the custom engraved models.
l
ZUMLINK-BTN2ENGRAVED
l
ZUMLINK-BTNRENGRAVED
l
ZUMLINK-BTN4ENGRAVED
l
ZUMLINK-BTN6ENGRAVED
l
ZUMLINK-BTN8ENGRAVED