134 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Power Supply Installation
The ZUMLINK-JBOX-PSU mounts directly to a 4 in. square junction box (sold separately) and
connects to other Zūm Link devices via CBL-CAT5E-ZUMLINK-P cables (sold separately).
In the Box
Qty. Description
1 ZUMLINK-JBOX-PSU, Zūm® Wired J-Box Power Supply
Additional Items
5 Yellow Wire Nut, 22-10 AWG (2049245)
1 Locknut (2047626)
1 Tie Wrap (2005429)
Install the Power Supply
WARNINGS:
l
To avoid fire, shock, or death, turn off the power at the circuit breaker or fuse and test
that the power is off before wiring!
l
Do NOT connect standard Ethernet ports on network-based devices to the orange
Zūm Link ports on any Zūm Link or Zūm Net device. Also, do NOT connect the purple
Zūm Net ports on the Zūm Net device to the orange Zūm Link ports on any Zūm Link
device. These connections may damage network devices.
To Next Page
Loading...
