Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 229
Set the Bluetooth PIN
The Bluetooth PIN enables a mobile device with the Zūm app to connect to the Zūm Wired
Keypad or the Zūm Network Bridge. The Bluetooth PIN can be set for all discovered devices, all
devices in a Room Category, all devices on a Floor, or all devices in a Room.
NOTE: Once a Bluetooth PIN is set for a device, it remains until manually changed. For
example, if a device moves to a different room or floor, the Bluetooth PIN does not
automatically inherit the PIN set for the new location. The device keeps the PIN previously
set.
This section provides the following information:
l
Set the Bluetooth PIN for All Discovered Devices on page 229
l
Set the Bluetooth PIN for a Room Category on page 229
l
Set the Bluetooth PIN for a Room on page 230
l
Set the Bluetooth PIN for a Floor on page 230
Set the Bluetooth PIN for All Discovered Devices
To set the Bluetooth PIN for all devices:
1. Open the Category View.
2. Click the menu beside the ZUM-HUB4.
3. Click Bluetooth PIN.
4. Set the PIN (0 to 9999).
5.
Click to save or to cancel.
Set the Bluetooth PIN for a Room Category
To set the Bluetooth PIN for devices in a Room Category:
1. Open the Category View.
2. Click the menu beside the Room Category name.
3. Click Bluetooth PIN.
4. Set the PIN (0 to 9999).
5.
Click to save or to cancel.
To Next Page
Loading...
