Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 37
Cable Accessory Features
Cables accessories include the ZUMLINK-CONV-CN adapter cable and the
ZUMLINK-SPLTR-RJ45 splitter.
l
ZUMLINK-CONV-CN on page 37
l
ZUMLINK-SPLTR-RJ45 on page 37
ZUMLINK-CONV-CN ZUMLINK-SPLTR-RJ45
ZUMLINK-CONV-CN
l
Connects Cresnet devices to the Zūm Link network via a CBL-CAT5E-ZUMLINK-P cable.
l
Provides an RJ-45 female port and Cresnet network screw terminals
l
Daisy chain Zūm Link devices with the ZUMLINK-SPLTR-RJ45 to avoid dead ends
l
Plenum-rated cable
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
Cresnet Wired Network
The Zūm devices use the dependable Cresnet wired network for communication between
devices. The Cresnet bus offers easy wiring and configuration, carrying bidirectional
communication and 24VDC power to each device over a simple 4-conductor cable.
ZUMLINK-SPLTR-RJ45
The Zūm® Wired ZUMLINK-SPLTR-RJ45 RJ-45 splitter enables one CBL-CAT5E-ZUMLINK-P
cable to output two Zūm Link ports. It is plenum rated and works with Zūm Link devices. For
flexible, in-room wiring, use with the ZUMLINK-CONV-CN to daisy chain Zūm Link devices with
Cresnet® devices.
To Next Page
Loading...
