126 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Hub Installation
Mount the ZUM-HUB4 and connect it to the network. The ZUM-HUB4 can be mounted into a
rack or placed onto a flat surface.
In the Box
Qty. Description
1 ZUM-HUB4, 4-Series™ Control Processor for Zūm® Lighting Control System
Additional Items
1 Connector, 4-Pin (2003576)
1 Power Pack, 24VDC, 2.5A, 100-240VAC (2045873)
2 Bracket, Rack Ear, 1U (2032122)
4 Foot, 0.5 in. x 0.5 in. x 0.23 in., Rubber, Black (2002389)
1 Power Cord, 5 ft 10 in. (1.78 m) (2042043)
Mount to a Rack
The hub occupies 1U of rack space.
To install the included rack ears:
1. Use a #1 or #2 Phillips screwdriver to remove the three screws from each side of the front
of the device as shown in the following illustration.
2. Use the screwdriver and the screws removed in the previous step to attach the included
rack ears to the device.
To Next Page
Loading...
