Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 135
NOTES:
l
Install and use this product in accordance with appropriate electrical codes and
regulations.
l
A licensed electrician should install this product.
l
The product should project from the junction box when installed.
l
For use where temperatures are between 32° to 104°F (0° to 40°C)
l
For Chicago plenum compliant installations:
o
Ensure that the junction boxes and other electrical components are rated for
Chicago plenum.
o
Separate the high-voltage lines from the low-voltage cables.
o
Install two junction boxes: one junction box for the high-voltage lines and one
junction box for the low-voltage cables and load controller. A 6 in. square, 3.5 in.
deep box with conduit knockouts is recommended for the low-voltage cables
and load controller.
To Next Page
Loading...
