Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 19
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
Energy Efficiency
The load controllers are capable of energy monitoring through custom programming. Occupancy
sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To
reduce energy usage, lights turn off automatically when the room is vacant and dim gradually
depending on the amount of natural daylight in the room.
Easy Installation
For flexibility and ease-of-use, install Zūm devices (load controllers, keypads, and presence
detectors, refer to Overview on page 8) and connect them with Zūm Link
(CBL-CAT5E-ZUMLINK-P) or Zūm Net (CBL-CAT5E-ZUMNET-P) CAT5e cable (refer to Cables
on page 14). Nonsystem presence detectors may also be installed to any load controller with
analog inputs.
For flexibility and ease-of-use, Zūm wired keypads are preprogrammed so the keypad can be
installed in a room along with Zūm load controllers, occupancy or vacancy sensors, and a daylight
sensor, and then used to control the lights in the room without programming. Room setup can be
accomplished quickly through the Zūm app. A finished installation requires a decorator-style
faceplate (FP-G Series, sold separately).
Override Contact Closure Input
An integrated contact closure provides the means to place all connected Zūm Net and Zūm Link
devices into Emergency Override mode.
To Next Page
Loading...
