24 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
ZUMLINK-JBOX-20A-SW
l
Zūm® wired junction box mounted lighting load switch
l
Switching control of LED, fluorescent ballast, incandescent, magnetic low-voltage,
electronic low-voltage, neon/cold cathode, and high-intensity discharge
l
Integration with Zūm keypads, presence detectors, and daylight sensors (sold separately)
l
Zero-cross switch control of 20A, 100-277V high inrush lighting loads
l
Supports in-room device daisy chaining
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
Energy Management and Efficiency
The load controllers are capable of energy monitoring through custom programming. Occupancy
sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To
reduce energy usage, lights turn off automatically when the room is vacant and dim gradually
depending on the amount of natural daylight in the room.
Easy Installation
For flexibility and ease-of-use, install Zūm devices (load controllers, keypads, and presence
detectors, refer to Overview on page 8) and connect them with Zūm Link
(CBL-CAT5E-ZUMLINK-P) or Zūm Net (CBL-CAT5E-ZUMNET-P) CAT5e cable (refer to Cables
on page 14). Nonsystem presence detectors may also be installed to any load controller with
analog inputs.
To Next Page
Loading...
