CS-Lab CSMIO/IP-A

1.3 Standards compliance
The CSMIO/IP-A controllers were designed and made in accordance with the national and international
standards for industrial control systems based on electronic components:
• Detailed requirements for programmable controllers: working characteristics, shock resistance,
safety etc. EN61131-2 (IEC1131-2), CSA 22.2, UL508
• Compliance with European Guidelines (low voltage, level of electromagnetic interference
Electromagnetic Compatibility), the CE marking.
• Electrical and non-combustible properties of insulation materials: UL 746C, UL 94, etc.
• The Product made in lead-free technology, RoHS compliant.
1.4 Specification
Parameter
Value
Digital inputs number
24
Digital outputs number
16
Analog inputs number
4
Analog 0-10V outputs number
2
Analog +/-10V outputs number
6
Encoder inputs number
6
Supply voltage
24VDC +/-10%
Power consumption
5W
Maximum voltage on the in/out lines
30VDC
Maximum load of an output line
250mA
A voltage range of analog inputs
0-10VDC
Maximal load of analog outputs
50mA
Axis drives control type
Analog +/-10V
Maximum frequency of an encoder signal
6MHz
Encoder type
Incremental TTL
Encoder signal kind
Differential
PC connection
Ethernet 10/100Mb
Ambient temperature range
0
o
C do +60
o
C
Relative humidity
10% to 95%
(without condensation)
„KernelSpeed” a configuration parameter in Mach3 has no influence on CSMIO/IP working speed.
CS- Lab s.c. – CSMIO/IP- A - CNC controller Page 8