Configuring SNMP
Configuring SNMP Security
Page 163
• Use Default — Uses the device-generated Engine ID. The default Engine ID is based on the device MAC
address and is defined per standard as:
– First 4 octets — first bit = 1, the rest is IANA Enterprise number.
– Fifth octet — Set to 3 to indicate the MAC address that follows.
– Last 6 octets — MAC address of the device.
2. Define the Local Engine ID and Use Default fields.
3. Click . The SNMP global security parameters are set, and the device is updated.
To Next Page
Loading...
