Preface
D-Link DES-3010FA/GA User Guide Overview
Page 7
D-Link DES-3010FA/GA User Guide Overview
This user guide is divided into the following sections to provide concise information for installing, configuring, and
managing the device:
• Using the Installation Guide
• Using the Embedded Web Interface User Guide
Using the Installation Guide
This section provides an overview of the D-Link 3010FA/GA Installation Guide, which includes the following sec-
tions:
• Section 1. Device Description — Provides a system description including the hardware components.
• Section 2. Mounting Device — Provides step-by-step instructions for installing the device.
• Section 3. Starting and Configuring the Device — Provides step-by-step instructions for the initial device
configuration.
Using the Embedded Web Interface User Guide
This section provides an overview to the D-Link Web System Interface User Guide. The D-Link Web System Inter-
face User Guide provides the following sections:
• Section 4. Getting Started — Provides information about using the EWS, including The D-Link Embedded
Web Interface interface, management, and information buttons, as well as information about adding, modify-
ing, and deleting device information.
• Section 5. Managing Device Information — Provides information about opening the device zoom view and
defining general system information.
• Section 6. Configuring Device Security — Provides information about configuring device security for man-
agement security, traffic control, and network security.
• Section 7. Configuring Ports — Provides information about configuring ports.
• Section 8. Aggregating Ports — Provides information about configuring Link Aggregated Groups and
LACP.
• Section 9. Configuring VLANs — Provides information about configuring and managing VLANs, including
information about GARP and GVRP.
• Section 10. Configuring IP Information — Provides information about defining device IP addresses, ARP,
and Domain Name Servers.
• Section 11. Defining the Forwarding Database — Provides information about configuring and managing
both static and dynamic MAC addresses.
• Section 12. Configuring Spanning Tree — Provides information about configuring Spanning Tree Protocol
and the Rapid Spanning Tree Protocol.
• Section 13. Configuring Multicast Forwarding — Provides information about Multicast Forwarding.
• Section 14. Configuring SNMP — Provides information about defining SNMP v1,v2c, and v3 management,
including SNMP filters and notifications.
• Section 15. Configuring Quality of Service — Provides information about configuring Quality of Service on
the device.
• Section 16. Managing System Files — Provides information about downloading, uploading, and copying
system files.
• Section 17. Managing System Logs — Provides information about enabling and defining system logs.
• Section 18. Managing Device Diagnostics — Provides information about configuring port mirroring, testing
copper and fiber cables, and viewing device health information.
To Next Page
Loading...
