Configuring System Time
Defining SNTP Interface Settings
Page 225
Defining SNTP Interface Settings
The SNTP Interface Settings Page contains fields for setting SNTP on different interfaces. To define SNTP inter-
face settings:
1. Click System > SNTP > Interface Settings. The SNTP Interface Settings Page opens:
Figure 144: SNTP Interface Settings Page
The SNTP Interface Settings Page contains the following fields:
• Interface — Indicates the interface on which SNTP can be enabled. The possible field values are:
– Port — Indicates the specific port number on which SNTP is enabled.
– LAG — Indicates the specific LAG number on which SNTP is enabled.
– VLAN — Indicates the specific VLAN number on which SNTP is enabled.
• Receive Servers Updates — Enables the server to receive or not receive updates.
• Remove — Removes SNTP interfaces.
– Checked — Removes the selected SNTP interface.
– Unchecked — Maintains the selected SNTP interfaces.
2. Click . The Add SNTP Interface Page opens.
To Next Page
Loading...
Need help?
General