without enclosing quotes. For example: 2014-01-12. The time always defaults to 00:00:00 so
this example is equivalent to 2014-01-12 00:00:00. To look at log messages for the whole of
the 12th of January, the command would be:
gw-world:/> logsnoop -on -starttime=2014-01-12 -endtime=2014-01-13
When not looking at memlog, setting the times will act as a way of turning logsnoop on and off
at specified future times. If the -source=memlog option is used, the start and end times are used
to look at a specific period in the memlog history.
Chapter 2: Management and Maintenance
102
To Next Page
Loading...
