Note: Log event messages are not generated
No log messages are generated when diagnostics and improvement information is sent
by NetDefendOS back to D-Link.
Example 2.39. Disabling Diagnostics and Quality Improvements Messaging
This example shows how to disable the diagnostics and quality improvements feature.
Command-Line Interface
gw-world:/> set Settings DiagnosticSettings EnableDiagnostics=No
Web Interface
1. Go to: System > Advanced Settings > Diagnostic Settings
2. Disable the setting Anonymous Diagnostics Reporting
3. Click OK
Chapter 2: Management and Maintenance
143
To Next Page
Loading...
