address.
Example 9.21. Setting SSL VPN Interface Client Routes
This example shows how change the SSL VPN tunnel called my_sslvpn_if so that the only route
added to the routing table of clients is a route to the protected network protected_server_net
which is already defined in the NetDefendOS address book.
Command-Line Interface
gw-world:/> set Interface SSLVPNInterface my_sslvpn_if
ClientRoutes=protected_server_net
Web Interface
1. Go to: Network > Interfaces and VPN > SSL
2. Select the tunnel called my_sslvpn_if
3. Under Client Routes move the address object protected_server_net from Available to
Selected.
4. Click OK
Chapter 9: VPN
761
To Next Page
Loading...
