Name: telnet
DestinationPorts: 23
Type: TCP
SourcePorts: 0-65535
SYNRelay: No
PassICMPReturn: No
ALG: <empty>
MaxSessions: 1000
Comments: Modified Comment
Web Interface
1. Go to: Objects > Services
2. Select the telnet entry in the list
3. In the Comments textbox, a suitable comment
4. Click OK
Verify that the new comment has been updated in the list.
Important: Configuration changes must be activated
Changes to a configuration object will not be applied to a running system until the new
NetDefendOS configuration is activated.
Example 2.14. Adding a Configuration Object
This example shows how to add a new IP4Address object, here creating the IPv4 address
192.168.10.10, to the address book.
Command-Line Interface
gw-world:/> add Address IP4Address myhost Address=192.168.10.10
Show the new object:
gw-world:/> show Address IP4Address myhost
Property Value
--------------------- -------------
Name: myhost
Address: 192.168.10.10
UserAuthGroups: <empty>
NoDefinedCredentials: No
Comments: <empty>
Web Interface
1. Go to: Objects > Address Book
2. Click on the Add button
Chapter 2: Management and Maintenance
74
To Next Page
Loading...
