• Name: r_relay1
• DHCP Server: rr_dhcp_server
• Source Interface: vlan_auth
• Client IP Filter: client_ip_range
• Remote Server IP: radius_ip
• Override User Data Interface: vlan_data
3. Click OK
Note: Configuring the RADIUS server to send the group name
In the above example, it is assumed the group name ue_group will be sent back by the
RADIUS server during authentication. The RADIUS server must be configured to do this.
When configuring the external RADIUS server to provide group information for the
logged in user to NetDefendOS, it is necessary to use the user group vendor specific
attribute. The NetDefendOS Vendor ID is 5089 and the user group is defined as
vendor-type 1 with a string value type.
Chapter 8: User Authentication
658
To Next Page
Loading...
