A-2: First, create an InterfaceGroup:
1. Go to: Network > Interfaces and VPN > Interface Groups > Add > Interface Group
2. Enter:
• Name: my_if_group
• Selected: wan and lan
3. Add server1 and server2 to Selected
4. Click OK
B-2. Now, create the SLBPolicy object:
1. Go to: Policies > Firewalling > Main IP Rules > Add > SLB Policy
2. Now enter:
• Name: my_web_slb_policy
• Source Interface: my_if_group
• Source Network: all-nets
• Destination Interface: core
• Destination Network: wan_ip
• Service: http-all
• Selected: server1 and server2
3. Click OK
Chapter 10: Traffic Management
818
To Next Page
