EasyManua.ls Logo

D-Link NetDefendOS

D-Link NetDefendOS
912 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
attack to be based on illegal checksums.
Default: Enabled
Log non IPv4/IPv6
Logs occurrences of IP packets that are not IPv4 or IPv6.
Default: Enabled
Log Received TTL 0
Logs occurrences of IP packets received with the "Time To Live" (TTL) value set to zero. Under no
circumstances should any network unit send packets with a TTL of 0.
Default: Enabled
Block 0000 Src
Block 0.0.0.0 as source address.
Default: Drop
Block 0 Net
Block 0.* as source addresses.
Default: DropLog
Block 127 Net
Block 127.* as source addresses.
Default: DropLog
Block Multicast Src
Block multicast both source addresses (224.0.0.0 - 255.255.255.255).
Default: DropLog
TTL Min
The minimum TTL value accepted on receipt.
Default: 3
TTL on Low
Determines the action taken on packets whose TTL falls below the stipulated TTLMin value.
Default: DropLog
Chapter 13: Advanced Settings
850

Table of Contents

Related product manuals