User's Manual
46
Step 3 Configure parameters.
Table 4-22 Broadcast content parameters description
Parameter Description
Insert Before Insert an option before the selected one on the display area.
Insert After Insert an option after the selected one on the display area.
Edit
Click next to the broadcast option to edit the prefix, and suffix of the
option.
Delete Click next to the broadcast option to delete the option.
Clear Delete all broadcast options.
Step 4 Click
Confirm
.
4.5.1.8.2 Volume/Encoding
Configure the volume of voice broadcast.
Step 1 Select
Setting
>
ITC
>
Voice Broadcast
>
Volume/Encoding
.
Step 2 Configure the input volume, output volume, and speaking speed as needed.
Figure 4-53 Volume/Encoding
Step 3 Click
Confirm
.
4.5.1.9 Device Test
4.5.1.9.1 Device Test
You can test the barrier opening, and closing, capture, display content, voice broadcast, and
abnormal configuration modules to see if they work as configured. You can also export related
To Next Page
Loading...
Need help?
General
