User's Manual
74
4.5.6.3 Safety
4.5.6.3.1 System Service
Select to enable system services as needed.
Step 1 Select
Setting
>
System
>
Safety
>
System Service
.
Figure 4-86 System Service
Step 2 Select needed system service.
Table 4-44 System service parameters description
Parameter Description
SSH
SSH (Secure Shell) implements data encrypted transmission, and
effectively avoid information leakage during remote management.
Multicast/Broadcast Search
●
Multicast
: It realizes point-to-multipoint network connection
between sender, and receiver.
●
Broadcast Search
: Broadcast data packet in IP subnet, all the
hosts in the subnet will receive these data packets.
Password Reset
When you forget the password of admin user, you can set new
password through password reset function.
CGI Service
CGI is the port between external application program, and web
server.
Onvif Service
Realizes network video framework agreement to make different
network video products interconnected.
Audio and Video
Transmission Encryption
Enable this function to encrypt streams transmitted through
private protocols.
RTSP over TLS
Enable this function to encrypt stream transmitted through
standard protocol.
It is recommended to keep the function on.
Private Protocol
Authentication Mode
Keep the recommended
Security Mode
.
Step 3 Click
Confirm
.
To Next Page
Loading...
Need help?
General
