User's Manual
57
Parameter Description
HTTP Port HTTP communication port. It is 80 by default.
RTSP Port Media streaming control port. It is 554 by default.
HTTPS Port HTTPS communication port. It is 443 by default.
Step 3 Click
Confirm
.
4.5.3.2.2 ONVIF
You can enable the Open Network Video page Forum (ONVIF) function to make network video
products of different manufacturers interworking.
ONVIF login authentication is enabled by default.
Step 1 Select
Setting
>
Network
>
Connection
>
ONVIF
.
Figure 4-64 ONVIF
Step 2 Select the
Turn on
check box.
Step 3 Click
Confirm
.
4.5.3.3 Auto Register
Through auto register function, when the device is connected with external network, system will
report its current location to the server so that client platform can access device through server.
Step 1 Select
Setting
>
Network
>
Auto Register
>
Auto Register
.
Step 2 Check
On
to enable the function.