User's Manual
47
device information.
Step 1 Select
Setting
>
ITC
>
Device Test
>
Device Test
.
Figure 4-54 Device test
Step 2 Configure parameters.
Table 4-23 Device test parameter description
Parameter Description
Barrier Opening, and Closing Click
Open
or
Close
to test the barrier.
Capture
Click
Test
to stimulate capture, and view the snapshot in
Live
page.
Display Content
Click
Test
, and view whether the LED screen displays as
configured.
Voice Broadcast
Click
Test
to check whether the device plays sound normally.
Voice broadcast is available on select models.
Abnormal Config
Click
Check
, and system checks abnormality automatically.
Export Device Info Select device information as needed, and export in batches.
4.5.1.9.2 Capturing Commissioning
You can overlay recognition area box, snap line, filtering area box, vehicle box, and license plate box
on the snapshots to help check the effect of the capturing commissioning.
Step 1 Select
Setting
>
ITC
>
Device Test
>
Capturing Commissioning
.
Step 2 Select
Overlay lines
, and
tracking info
check box, and then select types as needed.
To Next Page
Loading...
Need help?
General
