User's Manual
71
Figure 4-81 Add user
Step 3 Configure parameters.
Table 4-42 Add user parameters description
Parameter Description
Username
Username It can only consist of number, letter, underline, and hyphen, the
maximum length contains 15 characters, and it cannot be the same as the
existed username.
Password User’s password, and confirm password.
●
The password can be set from 8 characters to 32 nonblank characters,
and contains at least two categories from upper cases, lower cases,
numbers, and special characters (excluding "'", """, ";", ":", and "&")
●
Follow the password security prompt to set a high security level
password.
●
Password should be the same as Confirm Password.
Confirm Password
Group Name
Select the group to which new users belong. Each group has different
authorities.
Memo Remarks of the user.
Operation
Permission
Select the permissions that you want assign to the user.
Restricted Login Set the IP address that is restricted to log in, and the restriction time.
Step 4 Click
Save
.
Step 5 Select
Setting
>
System
>
Account
>
Account
>
Group Name
.
You have two groups named admin, and user by default, you can add new group, delete
added group or modify group authority, and memo.
To Next Page
Loading...
Need help?
General
