Dahua HCVR8204A-S3 - Page 113

103
 Resolution: The resolution of the tour window. Please note this function is for HDMI
only.
 Split: You can select window split mode from the dropdown list. For BNC, it supports
1-split mode only. For HDMI, it supports 1/4/9/16-split mode. Some series product
support 24/36-split. Please refer to the actual product.
 Add: Under specified window split mode, click it to add channel group. See Figure
4-64.
 Modify: Double click a channel or select a channel and then click Modify button, you
can change current channel setup. See Figure 4-65.
 Delete: Click it to remove selected channel group.
 Move up: Click it to move current selected channel up.
 Move down: Click it to move current selected channel down.
 Default: Click it to restore default setup.
Figure 4-63
Figure 4-64