Check the box here to enable this function. Right now system supports
1-window tour function and it follows “first come, first server” rule. DVR
processes the new triggered tour when the previous alarm ended. Otherwise
it resumes the previous tour status before the people counting.
Step 5 Click Save button to complete setup.
5.7.3.6 Audio Detect
System can generate an alarm once it detect the audio input is abnormal or audio volume
changes.
Note
Please connect to a smart network camera to the IP channel if you want to use audio
detection function.
Please make sure the connected smart network camera supports audio detection
function.
Step 1 From main menu->Setup->Event->Audio detect.
Enter audio detect interface. See Figure 5-94.
Figure 5-94
Step 2 Set parameters. Refer to chapter 5.7.3.1.1 motion detect for detailed information.
Input abnormal: Check the box here, system can generate an alarm once the audio
input is abnormal.
To Next Page
Loading...
