the same as the position of the fisheye.
Note
The of the PTZ camera is the center position of the video.
Electronic mouse, move it on the interface
to control the PTZ direction.
Fast positioning button. Click it first and then
click any position in the video. Left click
mouse, you can view the video from the
specified position.
It is to control PTZ movement speed. The
higher the value is, the faster the speed is.
For example, the step 8 speed is faster than
step 1.
4. Click add button and then click to save.
Now you complete one group position, you can view at the list. See Figure
5-99.
Figure 5-99
5. Repeat the above steps to set at least three group positions.
Note
For one PTZ camera, there must be three calibration groups. System max
supports 8 group positions. Please make sure the calibration position is
accurate.
For the first calibration group position, please select the reference objects at
To Next Page
Loading...
