the far distance to enhance the trigger accuracy.
6. Click OK button.
Calibration setup is complete. Go back to the smart track interface, the
status is shown as .
5.7.3.8 Alarm
Before operation, please make sure you have properly connected alarm devices such
as buzzer. The input mode includes local alarm/network alarm/IPC external alarm/IPC
offline alarm.
5.7.3.8.1 Local Alarm
It refers to alarm from the local device.
Step 1 From main menu->Setup->Event->Alarm.
Enter local alarm interface. See Figure 5-100.
Figure 5-100
To Next Page
Loading...
