It is the image upload interval. If the image upload interval is larger than
the image snapshot frequency, system just uploads the lasted image.
If the image interval is 5 seconds and the snapshot frequency is 2
seconds, system will send out the latest image at the buffer at 5
seconds.
If the image upload interval is smaller than the snapshot frequency,
system will upload at the snapshot frequency. For example, if the
image interval is 5 seconds and the snapshot frequency is 10
seconds, system will send out the image at 10 seconds.
From main menu->Setting->Camera->Encode->Snapshot to set
snapshot frequency.
Select a channel from the dropdown list and then set week, period and
record type.
Please select from the dropdown list and for each day, you can set two
periods.
Please select uploaded record type (Alarm/intelligent/motion
detect/regular). Please check the box to select upload type.
Step 4 Click Test.
If the operation successful, device says FTP test successful.
If the operation failed, device says FTP test failed. Please check network
connection and settings.
Step 5 Click Save to complete the setup.
5.7.4.5 Manual Record
Step 1 From main menu->Setup->Storage->Record.
Enter record interface is shown as in Figure 5-120.
Figure 5-120
To Next Page
Loading...
