Dahua HCVR8204A-S3 - Page 362

352
5.7.4.4 FTP
It is to backup record file or image to the FTP to storage or view.
Before the operation, please download or purchase the FTP service tool and install on the
PC.
Note
For the FTP user, please set FTP folder write right, otherwise system cannot upload the
image.
Step 1 From main window->Setup->Network->FTP.
Enter FTP interface. See Figure 5-119.
Figure 5-119
Step 2 Check the box to enable FTP function.
Step 3 Set parameters.
Parameter
Function
Host IP
The host IP you have installed the FTP server.
Port
The default setup is 21.
User
name/Password
The account for you to access the FTP server.
Remote directory
The folder you created under the root path of the FTP according to the
corresponding rule.
 If there is no remote directory, system can auto create different
directories according to the IP, time and channel.
 If there is remote directory, system can create corresponding folder
under the FTP root path and then create different folders according
to IP address, time and channel.
File length
File length is upload file length. When setup is larger than the actual file
length, system will upload the whole file. When setup here is smaller
than the actual file length, system only uploads the set length and auto
ignore the left section. When interval value is 0, system uploads all
corresponding files.