Figure 5-117.
Figure 5-117
Refer to chapter 5.7.4.2.1 Schedule record for detailed information.
5.7.4.3 HDD Manage
It is to view HDD information. You can also operate the read-only, read-write, redundancy
(if there are more than on HDD) and format operation.
From main menu->Setup->Storage->HDD manager, enter HDD manager interface. See
Figure 5-118.
Figure 5-118
Select a HDD and then click Format, click OK on the pop-up dialogue box, system
format current HDD.
Click HDD operation, it is to select HDD properties such as read-only, read-write,
redundant and etc.
To prevent files be overwritten in the future, you can set HDD as read-only.
To backup recorded video file, you can set HDD as redundant HDD.
To Next Page
Loading...
