Web Operations 134
Remote device Figure 5-9
Click Device Search. Step 2
The searched devices are displayed.
Select the Uninitialized check box. Step 3
The uninitialized devices are displayed.
Select the check box the uninitialized device, and then click Initialize. Step 4
The password setting interface is displayed. See Figure 5-10.
Password setting Figure 5-10
Configure the password by either of the following two ways. Step 5
Select the Using current device password and email info check box, then the
remote device will use the password and email information of the Device.
Manually configure password for remote devices.
1) Clear the Using current device password and email info check box.
The password setting interface is displayed. See Figure 5-11.
To Next Page
Loading...
Need help?
General