Web Operations 136
Initialization completed Figure 5-13
Click Save. Step 7
5.1.5.2 Adding a Remote Device
You can add a remote device manually or by search.
Select SETUP > CAMERA > REMOTE. Step 1
The REMOTE interface is displayed.
Add a remote device. Step 2
By search
1) Click Device Search, the searched devices are displayed.
2) Double-click on an IP address or select the check box of a device, and then click
Add.
The device displays in the added device area.
Manual Add
1) Click Manual Add.
The Manual Add interface is displayed. See Figure 5-14.
To Next Page
Loading...
