Web Operations 137
Manual add Figure 5-14
2) Configure the parameters. For details, see Table 5-4.
The parameters might be different depending on the model you purchased.
Table 5-4 Manual add parameters description
Select a manufacturer according to the actual situation.
Enter the IP address of remote device.
TCP service port. The default setting is 37777. You can configure this
parameter according to your actual situation.
Enter RTSP Port number of remote device. The default setting is 554.
Enter HTTP Port number of remote device. The default setting is 80.
Enter the user name and password to login the remote device.
Select the channel number that you want to connect.
Select a channel from Channel 9 to Channel 12 for the remote device.
Enter the size of decode buffer. The unit is millisecond and you can
select from 80 through 480.
3) Click Save.
The device displays in the added device area.
If the remote device that you want to add has the same IP address and TCP
port with the existing added device, then this device cannot be added.
Indicates connection success, indicates connection failed.
To Next Page
Loading...
Need help?
General