Web Operations 158
The system supports searching the recorded files through the record type (general,
motion detect, or alarm), and supports searching the snapshots.
Select the file that you want to download, and then click Download to Local. Step 3
The Download to Local interface is displayed. See Figure 5-40.
Download to local Figure 5-40
Select the record type and save path, and then click OK. Step 4
The system indicates the downloading progress and pops up a message after
completed.
5.2.2.4.2 Download by Time
You can download the recorded video by time.
Click the Download by Time tab. Step 1
The Download by Time interface is displayed. See Figure 5-41.
Download by time Figure 5-41
Select channel, bit stream type, start time, and end time. Step 2
Click Download to Local. Step 3
The Download to Local interface is displayed. See Figure 5-40.
Select the record type and save path, and then click Save. Step 4
The system indicates the downloading progress and pops up a message after
completed.
5.2.2.4.3 Watermark
You can also verify whether the watermark is falsified.
Click the Watermark tab. Step 1
The Watermark interface is displayed. See Figure 5-42.
To Next Page
Loading...
