Web Operations 199
The higher the percentage, the more transparent the local interface will
become.
Select the Channel Display check box, then the channel title is
displayed in the live view screen.
Select the GPS Display check box, the GPS information is displayed in
the live view screen.
Click Save. Step 3
5.3.5.1.2 Configuring Tour Settings
The videos display in turn according to the channel group configured in tour settings. The
system is playing one group for a certain period and then automatically changes to the next
group.
Optimization: Alarm tour > Motion tour > General tour.
Select SETUP > SYSTEM > DISPLAY > Tour. Step 1
The Tour interface is displayed, see Figure 5-86.
Tour Figure 5-86
Select the Enable check box. Step 2
Configure the parameters. For details, see Table 5-33. Step 3
Table 5-33 Tour settings parameters description
Configure the time for the channel groups display in turn. The default is 5
seconds.
In the Window Split list, select View 1, View 4, View 8, or View 9. If you
select View 1, the channel window displays one by one. If you select
other window split mode, the configured channel groups play in turn.
Configure the window split mode for motion tour and alarm tour. The
motion tour and alarm tour only support View 1 or View 8.
To Next Page
Loading...
Need help?
General