Local Configurations 20
Unlock Pattern Figure 4-2
Draw an unlock pattern. If you do not want to configure the unlock pattern, click Skip. Step 3
The password protection setting interface is displayed. See Figure 4-3.
Password protection Figure 4-3
Configure the protection parameters for password. Step 4
If you do not want to configure the settings, clear both the Email Address check box
and the Security Question check box.
Email Address: In the Email Address box, enter an email address for password
reset. In case you forgot password, enter the security code that you will get from
this reserved email address to reset the password of admin.
Select the Security Question check box, select the question and enter the
corresponding answer.
Click Save. Step 5
To Next Page
Loading...
Need help?
General