Local Configurations 35
The auto recording is enabled. For details, see "4.1.7 Configuring Record Settings."
Procedure
Select Main Menu > SETTING > SCHEDULE. Step 1
The SCHEDULE interface is displayed, see Figure 4-18.
Recording schedule Figure 4-18
Configure the parameters. For details, see Table 4-5. Step 2
Table 4-5 Record schedule parameters description
Select a channel to configure the corresponding recording schedule. If you
configure the same setting for all channels, select All.
Start recording for 0 seconds to 30 seconds before the alarm event occurs. If
you enter 0 seconds, there will be no pre-recording.
To Next Page
Loading...
