SiEN18-622 Instruction
System Configuration 197
Remote control
1. Signal transmitter:
• It sends signals to the indoor unit.
2. Display:
• It displays the current settings. (In this
illustration, each section is shown with all
its displays ON for the purpose of
explanation.)
3. HOME LEAVE button:
HOME LEAVE operation
4. POWERFUL button:
for POWERFUL operation
5. TEMPERATURE adjustment buttons:
• It changes the temperature of time setting.
6. ON/OFF button:
• Press this button once to start operation.
Press once again to stop it.
7. MODE selector button:
• It selects the operation mode.
(AUTO/DRY/COOL/HEAT/FAN)
8. SILENT button:
for OUTDOOR UNIT SILENT operation
9. FAN setting button:
• It selects the air flow rate setting.
10. SENSOR button:
for INTELLIGENT EYE
operation
11. SWING button:
• Flap (Horizontal blade)
12. SWING button:
• Louver (Vertical blades)
13. ON TIMER button
14. OFF TIMER button
15. TIMER Setting button:
• It changes the time setting.
16. TIMER CANCEL button:
• It cancels the timer setting.
17. CLOCK button
1
2
5
6
9
11
16
17
13
15
14
3
4
7
8
10
12
<ARC433A21, A22>
To Next Page
Loading...
