Table 1: Version History
Version Remarks
AJ402315027937, version 0401 Update for general release 4.
1.5 Safety Symbols
The following symbols are used in Danfoss documentation.
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
ISO warning symbol for hot surfaces and burn hazard
ISO warning symbol for high voltage and electrical shock
ISO action symbol for referring to the instructions
1.6 Medical Devices
WARNING
ELECTROMAGNETIC INTERFERENCE
AC drives and filters may produce electromagnetic interference up to 300 GHz that may affect the functionality of pacemakers
and other implanted medical devices.
1.7 General Safety Considerations
When installing or operating the AC drive, pay attention to the safety information given in the instructions. For more information about
safety guidelines for installation and operation, refer to the drive's operating guide.
10 | Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239
Design Guide | iC2-Micro Frequency Converters Introduction and Safety
To Next Page
Loading...
