Design Guide | iC2-Micro Frequency Converters Contents
Contents
Contents
1 Introduction and Safety
1.1 Purpose of this Design Guide 9
1.2 Additional Resources 9
1.3 Planning and Design Support Materials 9
1.4 Version History 9
1.5 Safety Symbols 10
1.6 Medical Devices 10
1.7 General Safety Considerations 10
1.8 Qualified Personnel 12
2 Approvals and Certifications
2.1 Product Approvals and Certifications 13
2.2 Standards 14
2.3 Export Control Regulation 15
3 iC2-Micro Frequency Converters
3.1 Intended Use 16
3.2 Block Diagram 16
3.3 Ecodesign for Power Drive Systems 17
3.3.1 Overview 17
3.3.2 Power Losses and Efficiency 18
3.4 Power Hardware 19
3.5 Control and Interfaces 19
3.5.1 Control Terminals 19
3.5.2 RJ45 Port and RS485 Termination Switch 20
3.5.3 Control Panel and Control Panel 2.0 OP2 21
3.5.4 Control Panel Buttons and Indicators 22
3.5.5 Control Panel 2.0 OP2 Buttons and Indicators 24
3.5.6 Sliding Door on the Terminal Cover 25
3.6 Application Software 26
3.6.1 iC2-Micro Application Software Overview 26
3.6.2 Basic Functions 27
3.6.2.1 Basic Functions Overview 27
3.6.2.2 Reference Handling 27
Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239 | 3
To Next Page
Loading...
