Danfoss iC2-Micro Series - Page 4

3.6.2.3 Two Setups 27
3.6.2.4 Ramps 27
3.6.2.5 Quick Stop 27
3.6.2.6 Limit Rotation Direction 27
3.6.2.7 Motor Phase Switch 27
3.6.2.8 Inching with Jogging Modes 27
3.6.2.9 Frequency Bypass 27
3.6.2.10 Automatic Restart 28
3.6.2.11 Flying Start 28
3.6.2.12 Mains Dropout 28
3.6.2.13 Kinetic Backup 28
3.6.2.14 Resonance Damping 28
3.6.2.15 Mechanical Brake Control 28
3.6.2.16 Controllers 28
3.6.3 IO Control and Readouts 29
3.6.4 Motor Control Features 29
3.6.4.1 Motor Control Features Overview 29
3.6.4.2 Motor Types 29
3.6.4.3 Load Characterstics 29
3.6.4.4 Motor Control Principle 29
3.6.4.5 Motor Nameplate and Catalog 29
3.6.4.6 Automatic Motor Adaptation (AMA) 29
3.6.4.7 Automation Energy Optimization (AEO) 29
3.6.5 Braking of Load 29
3.6.5.1 Braking of Load Overview 29
3.6.5.2 Resistor Braking 30
3.6.5.3 Overvoltage Control (OVC) 30
3.6.5.4 DC Brake 30
3.6.5.5 AC Brake 30
3.6.5.6 DC Hold 30
3.6.5.7 Load Sharing 30
3.6.6 Protection Features 30
3.6.6.1 Grid Protections 30
3.6.6.2 Drive Protection Features 30
3.6.6.3 Motor Protection Features 31
3.6.6.4 Protection of Externally Connected Components 31
3.6.6.5 Automatic Derating 31
3.6.7 Monitoring Features 31
4 | Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239
Design Guide | iC2-Micro Frequency Converters Contents