Figure 11: Removing the Sliding Door
Reassembly
1. Slide the sliding door into the terminal cover.
Figure 12: Installing the Sliding Door
3.6 Application Software
3.6.1 iC2-Micro Application Software Overview
The application software is the default and standard software delivered with the iC2-Micro Frequency Converters. The features are briefly
described in the following sections:
l Basic Functions
l Controllers
l Protection Features
l Software Tools
26 | Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239
Design Guide | iC2-Micro Frequency Converters iC2-Micro Frequency Converters
To Next Page
Loading...
