Danfoss iC2-Micro Series - Page 5

Design Guide | iC2-Micro Frequency Converters Contents
3.6.7.1 Monitoring Features Overview 31
3.6.7.2 Speed Monitoring 31
3.6.7.3 Event Log and Operational Counters 31
3.6.8 Software Tools 31
3.6.8.1 Software Tools Overview 31
3.6.8.2 MyDrive® Select 32
3.6.8.3 MyDrive® Harmonics 32
3.6.8.4 MyDrive® ecoSmart™ 32
3.6.8.5 MyDrive® Insight 32
3.7 Brake Functions 32
3.7.1 Mechanical Holding Brake 32
3.7.2 Dynamic Braking 32
3.7.3 Brake Resistor Selection 33
3.7.3.1 Introduction 33
3.7.3.2 Brake Resistance Calculation 33
3.7.3.3 Danfoss Recommended Brake Resistance Calculation 34
3.7.3.4 Control with Brake Function 35
4 Specifications
4.1 Electrical Data 36
4.1.1 Mains Supply 1x100–120 V AC 36
4.1.2 Mains Supply 1x200–240 V AC 36
4.1.3 Mains Supply 3x200–240 V AC 37
4.1.4 Mains Supply 3x380–480 V AC 38
4.2 General Technical Data 39
4.2.1 Protection and Features 39
4.2.2 Grid Side 39
4.2.3 Motor Output and Motor Data 40
4.2.4 Torque Characteristics 40
4.2.5 Control I/O 40
4.2.5.1 Control I/O Overview 40
4.2.5.2 Digital and Pulse Input 41
4.2.5.3 Digital and Pulse Output 41
4.2.5.4 Analog Input 42
4.2.5.5 Analog Output 42
4.2.5.6 Relay Output 43
4.2.5.7 Auxiliary Voltages 43
Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239 | 5