Danfoss iC2-Micro Series - Page 6

4.2.6 RS485 Serial Communication 44
4.2.7 Ambient Conditions 44
4.2.7.1 Overview of Ambient Conditions 44
4.2.7.2 Ambient Conditions during Storage 44
4.2.7.3 Ambient Conditions during Transport 45
4.2.7.4 Ambient Conditions during Operation 45
4.3 Fuses and Circuit Breakers 45
4.4 Power Connectors 46
4.5 Acoustic Noise 48
4.6 EMC Compliance Levels 48
4.6.1 Overview of EMC Compliance Levels 48
4.6.2 Emission Requirements 49
4.6.3 EMC Immunity Requirements 49
4.7 EMC Compatibility and Motor Cable Length 51
4.8 dU/dt Conditions 51
4.9 Derating 53
4.9.1 Overview of Derating 53
4.9.2 Manual Derating 53
4.9.3 Automatic Derating 56
5 Exterior Dimensions
5.1 IP20/Open Type Enclosure Sizes and Dimensions 57
5.2 IP21/UL Type 1 Enclosure Sizes and Dimensions 58
5.3 NEMA 1 Enclosure Sizes and Dimensions 59
6 Mechanical Installation Considerations
6.1 Contents of the Shipment 60
6.2 Product Labels 60
6.2.1 Product Labels Overview 60
6.2.2 Product Labels on Drives 60
6.2.3 Package Labels 61
6.3 Recommended Disposal 62
6.4 Storage until Installation 62
6.4.1 Reforming the Capacitors 62
6.4.2 Safe Transportation and Storage 63
6.5 Prerequisites for Installation 64
6 | Danfoss A/S © 2024.08 AJ402315027937en-000401 / 130R1239
Design Guide | iC2-Micro Frequency Converters Contents