Laser Safety
100
Arex™ 400
Other risks
An additional risk may be represented by fire caused by processing materials
other than those the laser marker was designed for.
W
ARNING
Do not use this laser marker for other purpose than the one it was designed for.
Another additional risk associated with the laser marker is electricity. This may
occur when accessing internal parts of the laser marker.
W
ARNING
W
ARNING
Only Datalogic authorized personnel, who have been trained and instructed on the
electrical and optical risks, is allowed to access the internal parts of the scan head.
Datalogic shall not be held liable for any damage caused by inadequate
work from
non-authorized personnel.
Only Datalogic authorized personnel, who have been trained and
instructed on the
electrical and optical risks, is allowed to access the internal parts of the control rack.
Datalogic shall not be held liable for any damage caused by inadequate
work from
non-authorized personnel.
To Next Page
Loading...