Installation
2
Arex™ 400
Unpacking
W
ARNING
W
ARNING
W
ARNING
W
ARNING
The Arex™ 400 laser marker is a delicate optical device, that can be damage by shock
and vibrations.
To avoid damaging or breaking the optical fibe
r, never subject the Head Cable to a
bending radius below the limits specified in the technical specification table (see
“Technical Characteristics” on page 19).
Be extremely careful to not damage the connection c
able between scan head and con-
trol rack.
Control rack and scan head are joined by a c
onnection cable 3 meters long, referred as
Head Cable. Control rack and scan head are NOT separable.
To Next Page
Loading...
Need help?
General
