Preface
xii
Arex™ 400
The Arex™ 400 laser marker features a control rack and a scan head. The control
rack size is standard 19" 2.5U. The scan head compact dimensions make it easy
to integrate.
All product connections are on the rear or front of the control rack.
W
ARNING
Laser marking interacts with materials through, for example, a thermal carbonization
process which may lead to the emission of fumes, dust and vapors.
Adequate fume/dust extractor and treatment must be provide
d by customer!
Important Warnings
Access to the internal parts of the laser marker is allowed only to authorized
personnel, duly qualified and trained with regards to risks of optical and electri-
cal nature.
Datalogic declines any and all responsibility for work carried out on active parts
by
untrained or unauthorized personnel.
W
ARNING
W
ARNING
W
ARNING
W
ARNING
Marking PVC (or other plastic material) can cause the release of chlorine gas which can
be harmful to the laser operator and to the laser marker itself. Always use adequate
fume extractor during PVC and plastic marking.
Never expose reflecting surface
s to laser radiation!
The reflected laser beam may cause damage to laser marker.
The integration and use of this laser marker is custo
mer responsibility.
It is forbidden to change the intended use for which the product was designed and
developed.
Datalogic declines any and all responsibility for improp
er use of its laser product.
To Next Page
Loading...
Need help?
General
